Piastra/lamiera in acciaio inossidabile ASTM A240 con un buon prezzo (304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA

Informazioni basilari.

Modello numero.	304
Trattamento della superficie	Colorato
Processi	Laminato a caldo;Laminato a freddo
Superficie	Superficie del mulino;2b;Ba;Hl;No.1;No.4;Specchio colore
Lunghezza	2000/2438/3000/6000mm
Larghezza	1000/1219/1500/1800/2000mm
Pacchetto di trasporto	Pacchetto di esportazione
Specifica	0,4-3 mm
Marchio	ZYTC
Origine	Cina
Codice SA	7219131900
Capacità produttiva	1000000000tonnellate/anno

Descrizione del prodotto

nome del prodotto	Piastra in acciaio inossidabile ASTM A240 S30408 ​​304 con buon prezzo
Spessore	0,3 mm-200 mm
Larghezza	1000mm-2800mm
Lunghezza	2000 mm, 2438 mm, 3000 mm, 6000 mm O come requisito
Fine	N.1, 2B, HL, N.4, BA, SB, 1D, 2D, 2C, 2E, N.5, N.9
Tecnico	Laminazione a caldo, laminazione a freddo
Standard	ASTM 240, A480, JIS G 4304, EN 10088-2
MOQ	5 tonnellate
Certificazione	MTC tipo 3.1, PMI, CO
Tempi di consegna	7 giorni se si dispone di azioni

Descrizione del prodotto
1. Piastra in acciaio inossidabile ASTM A240 S30408 ​​304 con buon prezzo (304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA
2. spessore: 0,4-200 mm 3. larghezza: 1000/1219/1500/1800/2000/2500 mm 4. Lunghezza: 2000/2438/3000/6000 mm, o altra lunghezza secondo le vostre esigenze. 5. Superficie: decapaggio; superficie del mulino; 2B; HL; N.4; 8 MILA; Specchio colorato; HL colorato; Superficie di incisione, ecc.6.Processo: laminato a caldo, laminato a freddo,7. Il grado materiale che abbiamo 201,202,1.4371,1.4373,SUS201,SUS202,301,303,304,304L,304LN,304N,309,309S,310,310S,316L,316Ti,317L,321,321H,347H,1.4319, 1.4305,1.4301,1.4306,1.4833,1.4845 ,444,1.4016,1.4006, 1.4002,1.4125,1.4501,1.4362,1.4460,1.4521,1.4545 ,1.4542,1.4568,1.4547,F51,F52,F53,F55,F60,630,631,17-4PH,15-5PH,S31254,S31803,S32900,S32205,S32750,S32550,S32760,S32304,S31 200,S17400,S17700,904L ,254SMo,1.4462,1.4410,1.4501,1.4362,1.4460,1.4545,1.4542,1.4568,1.4547,1.4529,1.4539 e così via.



First of all from the reasons for rusty stainless steel. When the stainless steel surface of the passive film corrosion resistance in the weak part of the formation of pitting due to self-induced reaction, and then the formation of small holes, slowly with chloride ions close to the final formation of a highly corrosive liquid, More speed up the corrosion rate of stainless steel. There is also a reason for the corrosion of cracks between the crystal within the stainless steel, which destroyed the stainless steel surface of the passivation film. Therefore, the surface of stainless steel must always be cleaned and maintained, so as to extend its service life. However, when cleaning the surface of stainless steel should pay attention to: stainless steel surface can not scratch the phenomenon; can not use with bleach ingredients and abrasive cleaning solution, if the use of washing liquid, must be used after the end of clean water rinse.1.When the stainless steel surface is grease, oil pollution, you can use a soft cloth to wipe clean, and then use a neutral detergent or ammonia solution cleaning.2.When the stainless steel surface appears rainbow pattern, because too much use of detergent or oil caused by washing with warm water neutral detergent can be cleaned.3.When the stainless steel surface is dusty or easy to go out of the dirt, you can use soap, weak detergent or ask to rinse. Trademarks on the surface of stainless steel, when washed with warm water or weak detergents, the adhesive ingredients should be rinsed with alcohol or organic solvents.